Korg KR-11 - Creating a New Pattern; Configuring Recording Settings

To Next Page

To Previous Page

KR-11

Creating a rhythm pattern

Creating a new pattern

1 Press the MODE button to select pad play mode (the PAD LED lights up).

2 Turn the genre selector to select the drum kit to use.

3 To record the pattern, press the button while holding down the MODE button.

The unit enters pattern edit mode, and the recording status changes to Rec Pause (the but-

ton blinks red).

4 For the next operations, see step 4 in “Creating a new rhythm pattern based on an existing

pattern”.

Configuring the settings for recording

You can configure the tempo, number of beats and quantize settings for recording while the unit is in

Rec Pause and in pattern edit mode (step 3 of “

Creating a new rhythm pattern based on an existing

pattern”).

Tem p o

1 Set the tempo by turning the tempo knob or by pressing the TAP button a number of times.

Tip:

You can set the tempo to make playing and recording easier.

Note:

The tempo is not saved in the pattern data.

Specifying the beat (number of beats)

1 Turn the tempo knob while holding down the FILL 2 button to set the number of beats from 1 to 8

(the button lights up).

Note:

You can’t set the number of beats in a pattern to a value less than the number of beats in a

fill.

Note:

You can’t set the number of beats in a fill to a value greater than the number of beats in the

pattern.

Other manuals for Korg KR-11