KR-11
-
Getting ready
6
Getting ready
|
Installing the batteries
Note:
Batteries are not included, and must be purchased separately.
1 Open the battery cover on the bottom of this unit.
2 Install four AA alkaline batteries, while making sure to observe the correct polarity (+, -).
3 Close the battery cover.
Make sure that the unit is off when you replace the batteries.
Depleted batteries should be removed from the unit.
You should also remove the batteries if you won’t be using the KR-11 for an extended period of
time.
When the batteries run low, blinks on the display. When this occurs, it’s time to replace the
batteries.
To Next Page
Loading...
