Korg KR-11 - Global Settings; Overview of Operations; Adjusting Pad Velocity Sensitivity; Adjusting Metronome Volume for Recording

KR-11 - Global settings
21
Global settings
In the global settings, you can configure the pad velocity sensitivity, the volume of the metronome
during recording and the auto power-off time.
| Global settings: overview of operations
1 Press the MODE button to select pattern play mode (the PATTERN LED lights up).
2 Long-press the TAP and MODE buttons.
The 1–3 buttons blink, and the unit enters global settings mode.
3 Use the 1–3 buttons (pads) to select the settings you want to change.
The button you press lights up, and the setting’s value appears in the display.
Button 1: pad velocity sensitivity →Adjusting the pad velocity sensitivity
Button 2: metronome volume for recording →Adjusting the metronome volume for recording
Button 3: auto power-off time →Setting the auto power-off feature
4 Use the tempo knob to set the value.
5 Long-press the TAP and MODE buttons to save all three settings together.
The unit returns to pattern play mode.
| Adjusting the pad velocity sensitivity
You can adjust how much the volume changes according to how hard you tap the 1–14 buttons and the
FILL 1, 2 buttons in pad play mode and pattern edit mode.
• A value of 0 makes the pads play at maximum volume, regardless of how hard or soft you play
the keys.
• A value of 1–15 makes the pads play at lower volumes when you tap softer, and at higher vol-
umes when you tap harder. Larger values allow for more intricate changes in volume.
Factory default value: 0 (velocity disabled)
If you turn the power off without saving the settings, the settings are not saved.