Korg KR-11 - Restoring Factory Defaults

KR-11 - Restoring the factory default settings
25
Restoring the factory default settings
This operation restores all of the KR-11’s settings to their factory defaults, including erasing the user
patterns, restoring the pedal switch and global settings and so forth.
1 Press the power button while holding down the FILL 1 and FILL 2 buttons to turn on the power.
After and alternately appear in the display, and alternately appear in the
display.
2 Press the TAP button to initialize the settings.
Once the 1–8 buttons light up, initialization is finished, and the unit starts up in pattern play mode.
If you want to cancel the initialization, press the FILL 2 button. The unit starts up in pattern play
mode.
Never turn off the power while initialization is in progress.