Korg KR-11 - Using Pedal Switches; Operating Unit with Pedal Switches

KR-11 - Using the pedal switches
23
Using the pedal switches
You can connect a pedal switch (sold separately) to the FOOT SW 1 and 2 jacks to play back or stop
patterns, insert a fill-in or trigger an instrument sound.
| Playing this unit by operating the pedal switches
1 Turn off the power, and connect a pedal switch (sold separately) to either or both the FOOT SW 1
or 2 jacks.
2 Turn on the power.
3 Press the MODE button to select the mode (pattern play or pad play) that’s controlled to the pedal
switch.
The LED for the selected mode (PATTERN or PAD) lights up.
4 Turn the genre selector to select a genre.
5 When you press a pedal switch, the button operation that’s registered to the pedal switch is
performed.
The default settings are shown below.
Pattern play mode
Pad play mode
FOOT SW 1 FOOT SW 2
8 BEAT
FILL 1
16 BEAT
COUNTRY
ISLAND
ROCK
BLUES/R&B
JAZZ/LATIN
EDM
3/5/ 7
METRONOME TAP
USER FILL 1
FOOT SW 1 FOOT SW 2
8 BEAT
Pad 8 (C. HH) Pad 9 (B.D.)
16 BEAT
COUNTRY
ISLAND
ROCK
BLUES/R&B
JAZZ/LATIN
EDM Pad 10 (B.D.)
3/5/ 7 Pad 9 (B.D.)
METRONOME Pad 14 (A4) Pad (Bb4)
USER Pad 8 (C. HH) Pad 9 (B.D)