KR-11
-
Using the pedal switches
24
|
Assigning functions to the pedal switches
1 Turn off the power, and connect a pedal switch (sold separately) to either or both the FOOT SW 1
or 2 jacks.
→Connecting pedal switches (sold separately)
2 Turn on the power.
3 Press the MODE button to select the mode (pattern play or pad play) that’s assigned to the pedal
switch.
The LED for the selected mode (PATTERN or PAD) lights up.
4 Turn the genre selector to select the genre that you want to control with the pedal switch.
You can save different settings for each genre.
5 Long-press the MODE button.
blinks in the display.
(To exit the mode, long-press the MODE button. The existing settings are saved, and the unit exits
the mode.)
6 Press pedal switch 1 or 2 that you wish to set.
or blinks in the display. Also, the currently assigned button blinks. (If the MODE but-
ton has been assigned, the PATTERN LED and PAD LED blink.)
7 Press the button you want to assign (the button blinks).
If the MODE button has been selected, the function to switch to the next pattern is assigned. If the
genre is set to metronome, the function to switch to the next rhythm is assigned.
Note:
Only one mode can be registered per genre.
8 Long-press the MODE button to save the settings.
The unit returns to the previous mode.
To Next Page
Loading...
