KR-11
-
Global settings
22
|
Adjusting the metronome volume for recording
This sets the volume that the digital metronome plays while recording from a value of 0 to 15.
During recording, only the digital metronome plays, without following a specific number of beats per
measure.
• A setting of 0 mutes the sound, and a setting of 15 plays the sound at full volume.
Factory default setting: 15
|
Setting the auto power-off feature
This specifies the time required before the auto power-off operates.
• Auto power-off is disabled when this is set to “off”, and the 1 H–4 H settings indicate the num-
ber of hours.
Factory default setting: 1 hour
To Next Page
Loading...
