Korg nanoKONTROL Studio User Manual

10
Customizing Controllers
KORG KONTROL Editor Software
The KORG KONTROL Editor software is required to customize the
operation of the nanoKONTROL Studio. Download the software
from the Korg website (http://www.korg.com/), and install the soft-
ware by following the instructions in the supplied document.
TIP For details on installing and using the KORG KONTROL Edi-
tor software, refer to the instruction manual for that soft-
ware.
Types of Parameters
The nanoKONTROL Studio contains two types of customizable pa-
rameters. Scene Parameters address the function of specific con-
trollers inside of the selected Scene. Global Parameters control the
overall operation of the nanoKONTROL Studio, regardless of the
selected scene.
Scene Parameters
These parameters determine what the nanoKONTROL Studio
does when you operate a controller in assignable mode. Five
scene parameters can be saved on the nanoKONTROL Studio.
By preparing scene parameters for each software that you use,
you can instantly switch the settings.
Global Parameters
These parameters specify general behavior of the
nanoKONTROL Studio, such as energy-saving features. The
global parameters will be shared among all scenes.

Korg nanoKONTROL Studio Specifications

General

Pad color	Black
Control type	Buttons, Rotary
Number of knobs	8
Backlight buttons	Yes
Keyboard number of keys	32
MIDI-keyboard number of keys	- keys
Battery type	AAA
Power source type	Battery, USB
Number of batteries supported	2
Interface	USB
Music memory capacity (songs)	5

Weight and Dimensions

Depth	160 mm
Width	278 mm
Height	33 mm
Weight	459 g