Korg nanoKONTROL Studio User Manual

11
Scene Parameters
Knobs
Knob Enable ........................................... [Enable, Disable]
This parameter specifies whether the Knob operations are en-
abled or disabled.
When set to “Disable”, a MIDI message will not be transmitted,
even if you operate a Knob.
MIDI Channel ............................................. [1...16, Global]
This parameter specifies which MIDI channel is used to transmit
MIDI messages from the Knobs. When set to “Global”, MIDI mes-
sages will be transmitted on the Global MIDI Channel, specified
in the global parameters. (¬ page.14: Global MIDI Channel)
CC Number ........................................................... [0...127]
This parameter specifies the CC number of the control change
message that will be transmitted.
Left Value ............................................................. [0...127]
This parameter specifies the value of the control change mes-
sage that is transmitted when you turn the Knob fully to the
left.
Right Value ............................................................ [0...127]
This parameter specifies the value of the control change mes-
sage that is transmitted when you turn the Knob fully to the
right.
Slider
Slider Enable .......................................... [Enable, Disable]
This parameter specifies whether the Slider operations are
enabled or disabled.
When set to “Disable”, a MIDI message will not be transmitted,
even if you operate a Slider.
MIDI Channel ............................................. [1...16, Global]
This parameter specifies which MIDI channel is used to transmit
MIDI messages from the Sliders.
When set to “Global”, MIDI messages will be transmitted on the
Global MIDI Channel, specified in the global parameters.
CC Number ........................................................... [0...127]
This parameter specifies the CC number of the control change
message that will be transmitted.
Lower Value ........................................................... [0...127]
This parameter specifies the value of the control change mes-
sage that is transmitted when you move the Slider to its lowest
position.
Upper Value .......................................................... [0...127]
This parameter specifies the value of the control change mes-
sage that is transmitted when you move the Slider to its highest
position.

Korg nanoKONTROL Studio Specifications

General

Pad color	Black
Control type	Buttons, Rotary
Number of knobs	8
Backlight buttons	Yes
Keyboard number of keys	32
MIDI-keyboard number of keys	- keys
Battery type	AAA
Power source type	Battery, USB
Number of batteries supported	2
Interface	USB
Music memory capacity (songs)	5

Weight and Dimensions

Depth	160 mm
Width	278 mm
Height	33 mm
Weight	459 g