Korg PA 600 - Page 46

42
Selecting and saving Performances
Saving your settings to a Performance
2 Select the ‘Write Performance’ command to open the Write Performance dialog box.
3 If you like, you may assign a new name to the Performance.
4 Select a bank and Performance location in memory, where you would like to save the
Performance.
Note: To select the target
bank and Performance loca-
tion, you can also select the
bank and Performance
parameters, and use the
VALUE dial.
After choosing the Write Performance menu
item, the Write Performance dialog box appears.
Touch the (Text Edit) symbol to open the
Text Edit dialog box.
Use the alphabetic
characters to enter
text.
Use the ‘<–’ and ‘–>’
buttons or the DIAL to
move the cursor.
Use the SHIFT button to
switch between capitals
and small characters.
Touch the ‘Backspace’ symbol to delete
just a single character, ‘Clear’ to delete
the whole string.
When done, touch OK to confirm the
new name, or Cancel to abandon all
changes.
The selected Perfor-
mance location is high-
lighted. Touch a
Performance’s name to
select it.
Touch one of the side tabs to select a
different Performance bank.
Touch one of the lower tabs to select
a different Performance page.