Korg PA 600 User Manual

52
Selecting and playing Styles
Adjusting the volume of the separate tracks
Adjusting the volume of the separate tracks
You can adjust the volume of each of the Style and Keyboard tracks, for example to soften the bass a
little, or to make the keyboard solo louder.
1 Touch the Volume tab to see the Volume panel.
2 Hold & drag the Virtual Sliders in the display to adjust each Keyboard track’s volume.
3 To separately adjust each Style track, press the TRACK SELECT button to change the
track’s view.
Hint: As an alternative,
you can change each track’s
volume, by touching a track’s
area to select it, then using
the VALUE dial to change the
volume.
4 To return to the Keyboard Tracks view, press the TRACK SELECT button again.
i
In Style view, all separate
Style tracks are shown, and
their volume can be
adjusted by dragging the
corresponding sliders.

Korg PA 600 Specifications

General

Polyphony	128 voices
Sequencer	16-track sequencer
Styles	360 factory Styles
Speakers	2 x 15W speakers
Keyboard	61 keys with velocity sensitivity
Dimensions	1030 x 378.3 x 127 mm
User Styles	Up to 1, 200 locations
Amplifier	15W x 2
Audio Inputs	Line In (Left/Right)
Audio Outputs	2 Line Out (Left/Right)
MIDI	In/Out
USB	USB to Host, USB to Device
Connectivity	USB, MIDI, Line In/Out
Sounds	Over 950 (including Stereo Piano and GM Level 2 sounds)
Display	7-inch color TFT touchscreen
Tones	Defined in Sounds as Over 950