Korg PA 600 User Manual

50
Selecting and playing Styles
The Pads
6 Then press the various VARIATION buttons, and see how an STS is automatically
selected when the corresponding Variation is selected.
7 Press the STS MODE again to turn its LED on (or off).
The Pads
Each Style or SongBook entry can assign different sounds or patterns to the four PADS. These sounds
or patterns can be played along with the Keyboard and Style tracks.
1 If you want to see which sounds or patterns are associated to the four Pads for the cur-
rent Style, touch the Pad tab to see the Pad panel.
Hint: You can open the
Pad Select window to assign
a different sound or pattern
to the Pads, by pressing SHIFT
+ one of the PADs.
2 Press one of the four PADS to play the corresponding Pad.
3 If the selected PAD triggers an endless sound or pattern (i.e. an applause, or a guitar
arpeggio), pressing STOP will stop that sound.
4 Select a different Style, and see how the sounds or patterns assigned to the PADS
change.
You can even press more Pads at once, and play two or more sounds or patterns at the same time.
Pressing STOP stops them all at the same time. Keeping STOP pressed and pressing one of the
PAD buttons only stops that sound or pattern.
i

Korg PA 600 Specifications

General

Polyphony	128 voices
Sequencer	16-track sequencer
Styles	360 factory Styles
Speakers	2 x 15W speakers
Keyboard	61 keys with velocity sensitivity
Dimensions	1030 x 378.3 x 127 mm
User Styles	Up to 1, 200 locations
Amplifier	15W x 2
Audio Inputs	Line In (Left/Right)
Audio Outputs	2 Line Out (Left/Right)
MIDI	In/Out
USB	USB to Host, USB to Device
Connectivity	USB, MIDI, Line In/Out
Sounds	Over 950 (including Stereo Piano and GM Level 2 sounds)
Display	7-inch color TFT touchscreen
Tones	Defined in Sounds as Over 950