Korg PA 600 User Manual

59
Song Play
Selecting a Song to play
Quick Guide
2 Touch the Song area to open the Song Select window.
This window is very similar to the one you can see when pressing the MEDIA button on the con-
trol panel, and touching the Load tab to see the Load page. This page is, however, “filtered” to
only see Song files.
Hint: As an alternative,
you can open the Song Select
window by pressing the
SONG button in the SELEC-
TION section on the control
panel.
3 Scroll through the list and select the Song to play.
4 When the Song is selected, touch the Select button to confirm your selection; this will
automatically close the Song Select window.
i
The selected Song is high-
lighted. Touch a Song’s
name to select it.
Use the scroll bar to see all Songs in
the list. Keep SHIFT pressed and
touch the Up/Down arrow to scroll
to the next/previous alphabetic sec-
tion. As an alternative, you can use
the VALUE dial.
Use the Open and Close buttons to
browse through the folders.
Use the Device pop-up menu to select
one of the available mass-storage devices.
Use the Locate button to ‘locate’ and go to
the folder of the selected Song.
Touch the Select button to select the high-
lighted Song, and assign it to the Player.
After touching the Select button in the display, the main page of
the Song Play mode will appear again.
Selected Song

Korg PA 600 Specifications

General

Polyphony	128 voices
Sequencer	16-track sequencer
Styles	360 factory Styles
Speakers	2 x 15W speakers
Keyboard	61 keys with velocity sensitivity
Dimensions	1030 x 378.3 x 127 mm
User Styles	Up to 1, 200 locations
Amplifier	15W x 2
Audio Inputs	Line In (Left/Right)
Audio Outputs	2 Line Out (Left/Right)
MIDI	In/Out
USB	USB to Host, USB to Device
Connectivity	USB, MIDI, Line In/Out
Sounds	Over 950 (including Stereo Piano and GM Level 2 sounds)
Display	7-inch color TFT touchscreen
Tones	Defined in Sounds as Over 950