71
The SongBook
Adding entries
Quick Guide
7 Touch the (Text Edit) button next to the field(s) you want to edit. Set all the other
parameters.
Note: The Master Trans-
pose could not change, if a
Lock is preventing it. See
Global > General Controls >
Locks.
You can write the Genre and Artist name. If you are saving a single STS, you can give it a name
(this is not possible if you are saving all STSs). Select a Tempo matching the Song’s Tempo, and
select the Meter (Time Signature) and Key of the Song. You can also specify a Master Transpose
value, to be automatically selected when selecting the entry.
8 When done with this page, touch the tab to go to the Book Edit 3 page, where you can
and set the Synchro and Memory parameters, and link a text file to the entry.
9 After having filled up all the desired fields (be as comprehensive as you can), touch the
Write button in the display to open the Write dialog box.
10 Touch the (Text Edit) button to assign a name to the new entry, then touch OK to
save the entry to the SongBook database.
i
Text file linked to the entry.
This text will be seen as Lyr-
ics in the display.
Synchro (for Style) and Memory (for Style
and Songs) On/Off status
Entry’s name. By default it is the same name of the associated Style, Stan-
dard MIDI File of MP3 file. The name can be up to 16 characters long.
Select Rename/Overwrite to replace an
existing entry. This option is automati-
cally selected when editing an existing
entry. Warning: the older entry will be
deleted!
Select New Song to add a new entry to
the SongBook database. This option is
automatically selected when a new entry
has been created (by touching the New
Song button while in the Edit 1 page).
To Next Page
Loading...
Need help?
General
