171
Song Play operating mode
Edit menu
Reference
Edit menu
From any page, press the MENU button to open the Song Play
edit menu. This menu gives access to the various Song Play edit
sections for the currently selected player (see “Songs area” on
page 163).
When in the menu, select an edit section, or press EXIT or
SONG PLAY to exit the menu.
When in an edit page, press the EXIT or SONG PLAY button to
go back to the main page of the Song Play operating mode.
Each item in this menu corresponds to an edit section. Each edit
section groups various edit pages, that may be selected by touch-
ing the corresponding tab on the lower part of the display.
Note: Some of the edit parameters are only meant for realtime. To
see which parameters are saved in the Performance, STS or Global-
Song Play Setup and which are not, see the “Parameters” chapter
on page 344.
As a general rule, Keyboard track parameters can be saved in a Per-
formance or SongBook STS, while some Song track parameters and
FX settings could be saved in the Global-Song Play Setup.
Edit page structure
All edit pages share some basic elements.
Operating mode
This indicates that the instrument is in Song Play mode.
Selected player
Before entering edit, select one of the two players, by using the
Song area of the main page (see “Switching between players dur-
ing editing” below).
Edit section
This identifies the current edit section, corresponding to one of
the items of the edit menu (see “Edit menu” on page 171).
Page menu icon
Touch this icon to open the page menu (see “Page menu” on
page 180).
Parameters area
Each page contains various parameters. Use the tabs to select
one of the pages. For detailed information on the various types
of parameters, see sections starting from page 171.
Tabs
Use tabs to select one of the edit pages of the current edit section.
Switching between players during
editing
When you enter Edit mode, you can edit the selected player’s
parameters. The selected player is always shown on the page
header.
To select a player, go to the main page of the Song Play mode,
and select the players you wish to edit. The selected player is
shown with a white background.
Mixer/Tuning: Volume/Pan
This page lets you set the volume and pan for each of the Key-
board or Song tracks.
Note: Song parameters cannot be saved when saving to a Perfor-
mance or STS.
Note: The play/mute status of a Song track may be reset when
selecting a Song made on a Pa-Series instrument.
Operating mode
Selected
player
Selected
track info
Page menu
icon
Parameters
area
Tabs
Edit section
To Next Page
Loading...
