Korg pa2X pro - Program Change Messages Used as Remote Commands; Control Change and Program Change Message Used as Remote Commands

325
MIDI Data
Program Change messages used as remote commands
Appendix
Program Change messages used as remote commands
The following is a table including all Program Change messages, used as remote Style and Player controls. These messages are to be sent
on the Control channel (see “MIDI: MIDI In Channels” on page 230).
Note: The above Program Change numbers are given according to the 0-127 numbering system.
Control Change and Program Change message used as remote commands
The following is a table including all Control Change + Program Change messages, used as remote Style and Player controls. These
messages are to be sent on the Control channel (see “MIDI: MIDI In Channels” on page 230). If a Style is already selected, just send the
Program Change message.
PC Function PC Function PC Function PC Function PC Function
Style Elements
80
Intro 1
81
Intro 2
82
Intro 3/Count In
83
Variation 1
84
Variation 2
85
Variation 3
86
Variation 4
87
Fill 1
88
Fill 2
89
Fill 3/Break
90
Ending 1
91
Ending 2
92
Ending 3
Style and Players Control
93 Fade In/Out 94 Memory 95 Bass Inversion 96 Manual Bass 97 Tempo Lock
98 Single Touch 99 Style Change 100
Start/Stop (Style)
101
Play/Stop (Ply 1)
102
Play/Stop (Ply 2)
CC#0 CC#32 PC STS PC STS PC STS PC STS
The same as the Style to which the STS belongs 64 STS 1 65 STS 2 66 STS 3 67 STS 4