173
Song Play operating mode
Mixer/Tuning: EQ Gain
Reference
Depending on the status of the “Ply.2 FX Mode” parameter,
Player 2 might use the C/D effect pair (see page 179).
Furthermore, in Sequencer mode you can create Songs using all
four effects (see “Effects: FX Select” on page 209).
Use the TRACK SELECT button to switch from Keyboard to
Song tracks, and vice-versa.
Note: When you stop, then start the Song again, or select a different
Song, the default Song track settings are selected again. You can,
however, pause the Song, change the effects, then exit from pause
and start the Song again. Edit the Song in Sequencer mode to per-
manently change the effects.
Send level (A…D)
0…127 Level of the track (direct) signal sent to the effect
processor.
Play/Mute icon
Track’s play/mute status. See “Keyboard track status” on
page 162 for more information.
Play status. The track can be heard.
Mute status. The track cannot be heard.
Mixer/Tuning: EQ Gain
In this page you can set the three-band equalization (EQ) for
each individual track.
Use the TRACK SELECT button to switch from the Keyboard to
the Song tracks, and vice-versa.
Note: The EQ is different for Player 1 and Player 2.
Hint: Track EQ can be memorized in the general preferences for the
Song Play mode (they are named Song Play–Global Setup). This will
help adapting the Pa2X's sound to personal taste for any MIDIfile
you will ever play. Need a lighter Bass track? Save the right equaliza-
tion, and the Bass will stay light with all the subsequent Songs.
Hi (High) Gain
This parameter lets you adjust the high frequencies equalization
on each individual track. This is a shelving curve filter. Values are
shown in decibels (dB).
-18…+18dB High gain value in decibels.
Mid (Middle) Gain
This parameter lets you adjust the middle frequencies equaliza-
tion on each individual track. This is a bell curve filter. Values are
shown in decibels (dB).
-18…+18dB Middle gain value in decibels.
Sng
Sng
Sng
To Next Page
Loading...
