42
Selecting and saving Performances
Selecting a Performance
The Performance is the musical heart of the Pa2X. Unlike selecting single Sounds, selecting a Perfor-
mance will recall several Sounds at the same time, the needed effects and transpositions, a suitable
Voice Processor preset, plus many more parameters useful for playing in a musical situation.
You can save all control panel settings in a Performance memory location (including your Digital
Drawbar Organ settings). While many Performances are already supplied with the instrument, you
can customize each of them to your own taste, and then save them in their customized form.
Similar to Performances, you can also save your settings to a Single Touch Setting (STS), which will
store all the settings for the Keyboard tracks. Four STSs are supplied with each Style and SongBook
entry, and can be selected with the four dedicated buttons under the display.
As far as Style tracks are concerned, you can save settings in a third object called the Style Perfor-
mance.
Please note that settings saved in Performance 1 are automatically selected when the instrument is
turned on. This means you can save your preferred startup settings to Performance 1.
Selecting a Performance
1 Touch the Performance area in the display, to open the Performance
Select window.
Note: You can open
the Performance Select
window also by pressing
one of the buttons in the
PERFORMANCE/SOUND
SELECT section – pro-
vided the LED on the
PERFORMANCE SELECT
button is on. This will let
you jump directly to the
desired Performance
bank.
Selecting and saving Performances
Performance/Sound Select sectionSingle Touch Settings (STS) section
i
The selected Performance is
highlighted. Touch a Perfor-
mance name to select it.
Touch one of the side tabs to
select a different Performance
bank.
Touch one of the lower tabs to
select a different Performance
page.
Set of banks. [1/10] corresponds to the top
row of Performances on the control panel,
[11/20] to the lower row.
To Next Page
Loading...
