78
Recording a new Song
Recording
Recording
1 Select the Style Element you wish to use before starting to play.
2 Start recording, by pressing the START/STOP button.
Note: If you do not
wish to start the Song
with the Style playing,
you can simply start
recording by pressing
the PLAY/STOP
button in the PLAYER 1
section, and start the
Style only later. The Style
will start at the next
beginning of the mea-
sure.
3 Play as if you were performing live with the Styles.
During recording, select any Style Element (Intro, Variation, Fill, Ending…) you like. You can
also press START/STOP to stop the Style, and press it again to start the Style up again!
Please remember that, while recording in Backing Sequence Record mode, you cannot use the
SYNCHRO, TAP TEMPO/RESET, BALANCE controls.
4 When finished recording your Song, press the (PLAY/STOP) button in
the PLAYER 1 section to exit recording, and return to the main page of the
Sequencer mode.
5 While in the main page of the Sequencer mode, press the (PLAY/
STOP) button in the PLAYER 1 section to listen to the recorded Song.
The Backing Sequence Song has been converted to an ordinary Song. If you like it, you can save
it to disk, and read it in Song Play mode, or with any external sequencer.
6 To edit the Song, press MENU to enter the Edit mode (see instructions
starting from page 205).
Select one of the Intros to start with an introduc-
tion. Select any of the Variations before starting
to record.
i
After pressing the PLAY/STOP button, the
main page of the Sequencer mode appears
again.
To Next Page
Loading...
