333
Installing the Korg USB MIDI Driver
Mac OS X: Installing KORG USB-MIDI Driver
Appendix
Mac OS X: Installing KORG USB-MIDI
Driver
1. Insert the included CD into your CD-ROM drive.
2. Please double click on the “KORG USB-MIDI Driver.pkg”
in the “KORG USB-MIDI Driver” folder inside the CD-
ROM, to run the installer. Install it according to the
instructions appearing on-screen.
Driver’s ports
After installation, the following ports will be shown in you MIDI
application (e.g., sequencer) among the other MIDI devices:
Pa2X KEYBOARD: This allows for reception of MIDI messages
from the Pa2X (keyboard and controller’s data) to the MIDI
application running on the Mac.
Pa2X SOUND: This allows for transmission of MIDI messages
from the MIDI application running on the Mac, to the internal
tone generator of the Pa2X.
To Next Page
Loading...
