71
Singing with a connected microphone
Connecting a microphone
Quick Guide
Pa2X is fitted with a powerful digital voice processor, based on technologies developed by TC Helicon,
including effects and three-part harmonization.
Connecting a microphone
To sing along with the Pa2X, you must first connect a suitable microphone to the MIC input (the one
that goes to the Voice Processor). Both dynamic and condenser microphones are directly supported.
Phantom power is available to condenser microphones.
1 Lower the Mic/In track volume by using the dedicated slider on the con-
trol panel.
Note: Lowering the
Mic/In track volume
helps avoiding feedback.
Feedback is caused by
audio generated by the
Pa2X, returning to the
audio circuitry via the
microphone.
2 Connect a microphone.
Singing with a connected microphone
Microphone inputMicrophone input volume control
Microphone, Harmony and Effect switches
i
To control the Mic volume, the
VOLUME LED must be turned
on. If it is off, repeatedly press
the SLIDER MODE button to
change it. Please note that the
SLIDER MODE status is saved
with each Performance or STS.
To Next Page
Loading...
