72
Singing with a connected microphone
Connecting a microphone
3 In case you are using a condenser microphone connected to the XLR MIC
input, press the GLOBAL button, choose the Audio Setup section, then go
to the Audio In page to see the microphone settings, and turn the phan-
tom power on.
4 Press the EXIT button to return to the main page of the Style Play or Song
Play mode.
5 Press the HARMONY and EFFECT buttons to turn their LED off, and deacti-
vate the Voice Processor. Be sure the ON LED (Mic input) remains turned
on.
You can check the status of these buttons, and the Talk function, also in the Mic panel. Press the
EXIT button to go to the main page of the Style Play or Song Play mode, then select the Mic tab.
Touch this checkbox to
turn phantom power on
on the XLR MIC input,
and switch a condenser
microphone on.
Mic panel. To test the
microphone level, be
sure the Mic Mute,
Effects and Talk buttons
are not pressed in.
To Next Page
Loading...
