336
Troubleshooting
Media related problems
Cannot format a device Is the USB cable correctly connected?
Is the USB device correctly powered?
Is the device inserted correctly?
Is the write protect tab of the disk in the protect position?
Cannot save data to a device Is the device formatted? 262
Is the device inserted correctly?
Is the write protect tab of the disk in the protect position?
Cannot load data from a device Is the device inserted correctly?
Does the device contain data compatible with the Pa2X? 251
The message “Over Current Con-
dition Detected on USB port:
please remove the USB media”
appears in the display
The USB device is probably defective, due to a short circuit, and cannot be used. While this will
not damage the Pa2X, it is advisable to remove the device.
Problem Solution Page
To Next Page
Loading...
