After following display is appeared, insert the SD card. When the SD card is inserted before the
SD Card Check, it is NG. After following display is appeared, insert the SD card then Pa500
begins internal check. When all items of the internal check are OK, the check proceeds to the
check of the touch panel automatically.
The USB check is always NG, so touch the [Next] icon to skip the check.
１：NAND CHECK
２：TGL CHECK
３：USB CHECK
４：SD CARD CHECK
５：MIDI CHECK
Display of request of SD Card insertion
Do not use the card which is used in the SD card Check for other purpose.
<<Check of Touch Panel>>
After the internal check passed, the check proceeds to the check of the touch panel
automatically. Touch the ①・②・③ (see next page) points in the display and confirm following
items.
*The values of [LCD X value], [LCD Y value] when you touch the 3 points is not “0” or “256”.
*The value of [LCD X value] becomes bigger by the order of ①->②->③.
* The value of [LCD Y value] becomes smaller by the order of ①->②->③.
*When you touch the LCD, the mark appears at the [MOVE] icon.
*When you remove your finger from the LCD, the mark appears at the [OFF] icon.
To Next Page
Loading...
Need help?
General
