Korg PS60 - Playing different sounds in different regions of the keyboard (Split)

11
Steinberg – Cubase 5
1
2
Start up Cubase 5 and create a project.
In the VST Instruments window, start up the “PS60 Plug-In Editor.”
3
Create a MIDI track. In the output section of that MIDI track, choose the “PS60 Plug-In
Editor” which you started up in the VST Instruments window.
4
To route the PS60’s audio signal to Cubase 5, create an audio track. On the input section
of the audio track, select the audio interface input where you’ve connected the PS60’s
audio signal.
5
Turn the Monitor button on so that you can hear/monitor the audio signal.