Korg PS60 User Guide

12
Ableton – Live 8
1
2
Start up Live 8, and choose “View” →“Session View.”
From the plug-in device browser, drag and drop the “PS60 Plug-In Editor” onto the
session view. This will create a MIDI track with the “PS60 Plug-In Editor” started up.
Verify that the “PS60 Plug-In Editor” is running in the MIDI track view.
3
Press the arm button so that the MIDI input from the external source will be sent to the
“PS60 Plug-In Editor.”
MIDI Track
4
To route the PS60’s audio signal to Live 8, create an audio track. In the input area of the
audio input/output section, select the audio interface input where you’ve connected the
PS60’s audio signal.
Audio Track
5
Set the Monitor setting to “In” so that you can hear the audio signal of the PS60.
Audio Track

Korg PS60 Specifications

General

Type	Performance Synthesizer
Synthesis Type	Sample-based synthesis
Velocity Sensitivity	Yes
Aftertouch	No
Arpeggiator	Yes
Sequencer	No
MIDI	In, Out, Thru
Power Supply	DC 9V
Keyboard	61 keys
Sound Engine	EDS-i
Effects	2 Master effects
Controllers	Pitch bend, modulation wheel
Outputs	2 x 1/4" (L/R)
USB	Type B x 1
Sound Generator	EDS-i
Preset Programs	440 programs
Polyphony	120 voices (120 Oscillators)
Inputs	1 x 1/4" (damper)