Korg PS60 User Guide

28
3
Specify the program name, category, and save destination, and click the [OK] button.
Note:
If you select an existing program as the save-destination, it will be overwritten. If you want
to add the program as a new program, select the user program “INIT.” With the factory settings,
D056
- D127 are user programs.
Note:
If you use a menu command (such as Copy IFX) on the PS60 itself, the data in the Editor
and the data in the PS60 may lose synchronization. In this case, use a UTILITY menu command
(such as Receive Current Prog) in the Editor to receive a data dump of the current data.
To save a performance, choose the utility menu command [Store Performance].
To save global settings, choose the utility menu command [Write Global Setting]. You can also
save by clicking the [DUMP] button located in the upper right of each page. Be aware that if you
fail to perform these operations, edits you make to the global parameters will not be reflected on
the PS60 itself. (Some pages do not have the [DUMP] button.)

Korg PS60 Specifications

General

Type	Performance Synthesizer
Synthesis Type	Sample-based synthesis
Velocity Sensitivity	Yes
Aftertouch	No
Arpeggiator	Yes
Sequencer	No
MIDI	In, Out, Thru
Power Supply	DC 9V
Keyboard	61 keys
Sound Engine	EDS-i
Effects	2 Master effects
Controllers	Pitch bend, modulation wheel
Outputs	2 x 1/4" (L/R)
USB	Type B x 1
Sound Generator	EDS-i
Preset Programs	440 programs
Polyphony	120 voices (120 Oscillators)
Inputs	1 x 1/4" (damper)