Korg ToneWorks AX3000G - Advanced Functions and Maintenance; Control via MIDI

42
The expression pedal target is indicated as follows.
“*/######”
*: Target category
######: Target parameter
• Examples
In addition to the examples we’ve shown here, a wide variety of expression tar-
gets provided for each effect model can be freely assigned to the expression
pedals.
If desired, you can make more detailed settings.
NOTE: For “--OFF--”, “VOLUME”, “M/PITCH”, “D/INPUT”, and “R/INPUT”, operat-
ing the expression pedal does not edit the parameter.
4. Turn value knob 2 to make the name display read “EXP MIN.” Here you can
specify the PITCH value for when the pedal is at the minimum position (pedal
back). Use value knob 2 or the ▲/▼ buttons to adjust the setting.
5. Turn value knob 3 to make the name display read “EXP MAX.” Here you can
specify the PITCH value for when the pedal is at the maximum position (pedal
forward). Use value knob 3 or the ▲/▼ buttons to adjust the setting.
When you operate the expression pedal, the target parameter will change
within the range you specified here.
NOTE: When you change the expression target, the MIN and MAX values will be
initialized.
6. Press the EXIT switch to return to the mode you were in.
NOTE: The changes you make will not be preserved in the internal memory unless
you store the program.
“--OFF--” --- OFF (controls nothing)
“VOLUME” --- Volume pedal
“P/DIRECT” --- DIRECT (mix amount of original sound)
for a pre-effect (e.g., OCTAVE)
“M/SPEED” --- (*: M (modulation)) SPEED of a modulation effect
“D/INPUT” --- (*: D (delay)) Input level of a delay effect
“R/MIX” --- (*: R (reverb)) MIX (mix amount of reverb sound) of a
reverb effect
“A/GAIN” --- (*: A (drive/amp)) GAIN of drive/amp model