Selecting and Playing Sounds
6
Assigning a Performance to a Set List Slot
1. Select the Performance that you’d like to assign.
2. Press the SET LIST button, so that it is lit.
3. Hold WRITE and press the Slot to which you’d like to save.
The Write page appears, with that Slot already selected. To change the Slot, hold WRITE and press a different Slot
button.
4. Press WRITE, and then ENTER to confirm.
The Set List will also be saved. If the Performance has been edited, you’ll be prompted to save it too.
While you’re on the Write page, you can also select a Slot from a different bank (for instance, if you’re copying a
Performance to a different Slot):
1. Hold WRITE and SHIFT, and press button 1-4 for the desired Bank.
2. Release WRITE and SHIFT.
3. Proceed to Step 3 above.
To Next Page
Loading...
