Getting Started
2
To go back to selecting sounds, press PERFORM. If you don’t see the main page the first time, press PERFORM again;
two presses will always bring you to the home page with the Performance name selected.
SHIFT
Hold down SHIFT to use alternative functions for knobs and buttons, labeled in blue text. For one-handed operation,
double-press SHIFT to turn on Shift Hold; press again to turn off.
ENTER for accelerated editing
Hold down ENTER to accelerate editing or scrolling. For example:
• Normally, the VALUE knob works as a “fine” value input when moved slowly, with “coarse” bigger jumps when
moved quickly. To restrict it to “coarse” value changes, hold ENTER while turning VALUE.
• Hold ENTER and press < or > (or turn the VALUE dial) to scroll by a whole page in a list, such as when selecting
Performances, Multisamples, or Mod routings.
Modulation
Most front-panel knobs and on-screen parameters are modulatable. Hold MOD and press > to create a new
modulation routing. When viewing and editing modulations, hold MOD and press < to filter the list. See the Mod List
Info page for an on-screen list of shortcuts.
Mod Knobs
You can use the Mod Knobs in real-time performance, and also save the results as new sounds. The names are
suggestions; they will do different things depending on the specific sound. The values are stored, and can themselves be
modulated. Each Layer’s Program has its own set of Mod Knobs, and an overall set of Performance Mod Knobs can
control any or all Layers at once. Sometimes, one knob (such as 1/MASTER) may enable the functionality of other
knobs.
Help pages
Hold SHIFT and press the (Randomize) button to bring up a set of pages containing shortcuts and usage tips.
To Next Page
Loading...
