Wave Sequencing 2.0
19
Mode
[Wave Sequence, Single Multisample]
Wave Sequence: The Program will use a Wave Sequence.
Single Multisample: The Program will use a Multisample instead of a Wave Sequence. All of the Lane controls will be
disabled.
Mode = Wave Sequence
Preset
[List of Presets]
Sync Notes (SYNC NOTES)
[Off, On]
Sync Notes sets whether individual Wave Sequences play on their own separate timelines, or whether they are sync’d
together.
Off: Each of the Program’s Wave Sequences will play independently.
On: If at least one note of the Program is already playing, the Wave Sequence lanes for newly played notes will start on
the same steps as those of the oldest note. See the graphic below. There may still be variations due to per-note
modulation or Probability.
Additionally, for all Layers which have both SYNC NOTES and TEMPO turned On, their Wave Sequences will sync
together.
Sync Notes
Use Master (SHIFT-MASTER)
[Off, On]
This enables the Master Lane. The parameter is stored in the Wave Sequence, as opposed to the Lane.
A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12
A1 A2 A3 A4 A5 A1 A2 A3 A4 A5 A1 A2
Timing Lane
Sample Lane
…
A1 A2 A3 A4 A2 A3 A4 A2 A3 A4 A2 A3Step Seq Lane
A7 A8 A9 A10 A11 A12
A2 A3 A4 A5 A1 A2
Timing Lane
Sample Lane
…
A4 A2 A3 A4 A2 A3Step Seq Lane
Sounding Note
New Note
To Next Page
Loading...
