Getting Started
3
Structure
The wavestate plays one Performance at a time.
A Performance has four Layers, A…D, a Vector Envelope, and a master reverb and EQ.
Each Layer contains an Arpeggiator, a Program, and other settings such as MIDI channel, key and velocity zones, etc.
A Program includes a Wave Sequence or a single Multisample, a Filter, an Amp, a per-voice Vector Envelope, a set of
modulators, a modulation matrix, and three effects: Pre FX, Mod FX, and Delay.
Performance
Layer D
Layer C
Layer B
Layer A
Arpeggiator
Program A
Voice
Wave
Sequence
Filter Amp
ADSR 1-3
ADSR
3x ADSR
ADSR 1-3
ADSR 1-3
ADSR
4x LFO
Pre FX Mod FX Delay
Reverb
Mod Matrix
EQ
Vector EG
(per voice)
+
Voice Assign
Volume
MIDI Channel
MIDI Rx Filters
Key & Vel Zones
Vector EG
parameters
Vector EG
(Performance)
Scales
Tempo
Step Seq
Key Track
Key Track
ADSR
2x Mod
Processors
Pitch
Portamento, Slope
Mod Knobs
Performance Mod Knobs
To Next Page
Loading...
