What to do if the differential pressure of my KRAL C Series Water Pump is too high?
If the differential pressure of your KRAL Water Pump is too high, check the system and reduce the differential pressure.
What to do if the level of liquid in the intake container of my KRAL C Series is too low?
If the level of liquid in the intake container of your KRAL Water Pump is too low, top up the pumped liquid.
What to do if my KRAL C Series Water Pump suction line or shaft seal leaks?
If the suction line or shaft seal of your KRAL Water Pump is leaking, check the suction line or shaft seal for leaks, paying particular attention to leakage at valves and connection points. Replace parts if necessary.
What to do if my KRAL C Series Water Pump suction valve or line is obstructed?
If the suction valve or line of your KRAL Water Pump is obstructed, check the suction valve and line to ensure they are clear.
What to do if my KRAL C Series Water Pump has incorrect pump direction of rotation?
If your KRAL Water Pump has an incorrect direction of rotation, make the electrical connection such that the direction of pump rotation matches that of the arrow on the flange cover.
What to do if my KRAL Water Pump filter or strainer is soiled?
If the filter or strainer of your KRAL Water Pump is soiled, clean the filter or strainer.
General| Brand | KRAL |
|---|---|
| Model | C Series |
| Category | Water Pump |
| Language | English |
To Next Page
