Kramer FC-404NET - Technical Specifications

Kramer Electronics Ltd.
FC‑404NET – Technical Specifications
11
Technical Specifications
INPUTS
4 balanced mono audio on terminal blocks
OUTPUTS
4 balanced mono audio on terminal blocks
PORTS
1 Dante Net on RJ-45 connector
1 RS-232 on a three-pin terminal block
1 USB mini connector (not used)
INDICATOR LEDS
On, In/Out Clipping, Sys, Sync
CONTROLS
Line/mic+phantom DIP-switches, factory reset button
BALANCED INPUT LEVEL MAX
3.2Vpp @ 0dB in/out gain and 0dB output volume
FREQUENCY RESPONSE
20Hz to 20kHz @1dB
THD+N
<0.008% @1kHz at maximum level
S/N RATIO
>85dB
CROSSTALK
<80dB
INPUT GAIN ADJUSTMENT
-12dB to +60dB
OUTPUT GAIN ADJUSTMENT
-78dB to +9dB
INPUT IMPEDANCE
10kΩ balanced
OUTPUT IMPEDANCE
50Ω balanced
MIC PHANTOM POWER
+48V DC =/- 10%
OPERATING TEMPERATURE
0° to +40°C (32° to 104°F)
STORAGE TEMPERATURE
-40° to +70°C (-40° to 158°F)
HUMIDITY
10% to 90%, RHL non-condensing
POWER CONSUMPTION
5V DC, 850mA max.
DIMENSIONS
18.8cm x 12cm x 2.6cm (7.4” x 4.7” x 1.0”) W, D, H, ½ 19” 1U
WEIGHT
0.41kg (0.9lbs) approx.
SHIPPING DIMENSIONS
35.1cm x 21.2cm x 7.2cm (12.4” x 8.4” x 2.8”) W, D, H
SHIPPING WEIGHT
0.95kg (2.1lbs) approx.
INCLUDED ACCESSORIES
Power supply
OPTIONS
RK-T2B 19” rack adapter
All Audio specification are from Analog In to Analog Out.
Specifications are subject to change without notice at www.kramerav.com