Kramer FC-404NET - Protocol 3000 Commands; System Commands - Mandatory

Kramer Electronics Ltd.
FC‑404NET – Protocol 3000 Commands
17
Protocol 3000 Commands
System Commands - Mandatory
All devices running Protocol 3000 use these commands.
Command
Description
Type
Permission
#
Protocol handshaking
System-mandatory
End User
BUILD-DATE?
Get device build date
System-mandatory
End User
FACTORY
Reset to factory default configuration
System-mandatory
End User
MODEL?
Get device model
System-mandatory
End User
PROT-VER?
Get device protocol version
System-mandatory
End User
RESET
Reset device
System-mandatory
Administrator
SN?
Get device serial number
System-mandatory
End User
VERSION?
Get device firmware version
System-mandatory
End User
#
Functions
Permission
Transparency
Set:
#
End User
Public
Get:
-
-
-
Description
Syntax
Set:
Protocol handshaking
# CR
Get:
-
-
Response
~nn @SP OKCR LF
Parameters
Response Triggers
Notes
Validates the Protocol 3000 connection and gets the machine number
Step-in master products use this command to identify the availability of a device
BUILD-DATE?
Functions
Permission
Transparency
Set:
-
-
-
Get:
BUILD-DATE?
End User
Public
Description
Syntax
Set:
-
-
Get:
Get device build date
#BUILD-DATE? CR
Response
~nn @BUILD-DATE SP date SP time CR LF
Parameters
date – Format: YYYY/MM/DD where YYYY = Year, MM = Month, DD = Day
time – Format: hh:mm:ss where hh = hours, mm = minutes, ss = seconds
Response Triggers
Notes