Kramer FC-404NET User Manual

Kramer Electronics Ltd.
FC‑404NET – Protocol 3000 Commands
18
FACTORY
Functions
Permission
Transparency
Set:
FACTORY
End User
Public
Get:
-
-
-
Description
Syntax
Set:
Reset device to factory default configuration
#FACTORY CR
Get:
-
-
Response
~nn @FACTORY SP OK CR LF
Parameters
Response Triggers
Notes
This command deletes all user data from the device. The deletion can take some time.
Your device may require powering off and powering on for the changes to take effect.
MODEL?
Functions
Permission
Transparency
Set:
-
-
-
Get:
MODEL?
End User
Public
Description
Syntax
Set:
-
-
Get:
Get device model
#MODEL? CR
Response
~nn @MODEL SP model_name CR LF
Parameters
model_name – string of up to 19 printable ASCII chars
Response Triggers
Notes
This command identifies equipment connected to Step-in master products and notifies of identity changes to the connected
equipment. The Matrix saves this data in memory to answer REMOTE-INFO requests
PROT-VER?
Functions
Permission
Transparency
Set:
-
-
-
Get:
PROT-VER?
End User
Public
Description
Syntax
Set:
-
-
Get:
Get device protocol version
#PROT-VER? CR
Response
~nn @PROT-VER SP 3000:version CR LF
Parameters
version – XX.XX where X is a decimal digit
Response Triggers
Notes

Kramer FC-404NET Specifications

General

Brand	Kramer
Model	FC-404NET
Category	Recording Equipment
Language	English