Kramer KC-Virtual Brain1 - Page 19

The Services Page
Kramer Control Brains run inside Services. Each Service is a Docker container capable
of running a single Kramer Control Brain. KC-Virtual Brain1 runs a single service.
On devices that run multiple Services, each service and the Brain it runs is isolated and
independent from the other Services.
The Services Page lists the available Services (Docker containers) and is used to initialize,
upgrade, run, stop and troubleshoot the services.
Note: If no Services have been installed, a “Missing required services" message warns
that the Services are not initialized. Please do Initializing the Services.
Figure13: The Services page with services installed.
If no service is active: The Service table will be empty and the Install button visible (top right in
green). See Initializing the Services.
If a Service is active: The Services table shows the following:
l
ID – The Docker ID of the Service.
l
Name – The Docker container’s name.
l
Image – Name of the Docker image that was used to create the container.
l
Version – The version number of the Brain running inside the Docker container.
l
Created At – The time the Docker Container was initialized.
l
Status - Status of the Docker container (running, stopped, initializing).
Action icons: Click an icon to perform the action. The following actions are available
(some require the service to be running):
- Restart the service.
- Start the service.
- Stop the service.
- Download the logs (downloads a Zip file). To view a “live” display of the logs, see
Brain Info – Diagnostics (select a Brain and then click Diagnostics).
- Opens the Brain Info page for this service (opens in a separate window). Brain Info
can also be opened by navigating to the Brain Info menu option.
Checking for updates: See Checking for updates.
Kramer Electronics Ltd.
KC-Virtual Brain1 - The Management Pages 19