Kramer KDS-7-MNGR - Page 36

Kramer Electronics Ltd.
KDS-7-MNGR – Using KDS-7-MNGR Embedded Web Pages
34
Managing Devices’ Network Parameters
Manage the Network parameters of the encoders/decoders in the system.
A green indication light next to a device, indicates that a device is online.
To Manage Network Parameters:
1. In the Navigation pane, Select Device Management>Network. The Network tab
appears.
Figure 33: Network Tab
2. Next to the device, mark the checkbox to make changes to a specific device.
3. For each Ethernet port, Define DHCP On or Off.
▪ When set to Off, define static IP Address, Mask Address and Gateway Address for
each port on each device.
Mark the checkbox next to the device ID.
4. Click APPLY.
Network parameters are managed.
Managing HDMI Signals
Manage the HDMI signal on the encoders/decoders in the system.
A green indication light next to a device, indicates that a device is online.