Defining KDS-7-MNGR User Access
The Users tab enables activating device security and defining logon authentication details.
When device security is on, web page access requires authentication upon initial landing on
operation page. The default password is admin. By default, security is disabled.
Enabling User Access
To enable security:
1. In the Navigation pane, click Device Settings. The General tab in the Manager Settings
page appears (see Figure 51).
2. Select Users tab.
Figure 58: Device Settings – Users Tab
3. Click On next to Security Status to enable web page authentication (Off by default). The
following message appears.
Figure 59: Security Tab – Security Status
4. Click PROCEED. The web page refreshes, and the password fields are visible.
Security is enabled and access requires authentication.
To Next Page
Loading...
Need help?
General
