Kramer Electronics Ltd.
KT-107, KT-107RB - Mounting the KT-107, KT-107RB
Inserting the On-Wall Mount Unit
To mount the on-wall mount unit:
1. Attach the on-wall mount unit to the installed in-wall junction box, (top side up, see the
indication arrows on the mount ).
2. Screw the 4 wall-mounting screws (supplied) through the screw openings .
The on-wall mount screw openings are set in different locations to fit various types of
in-wall junction boxes.
Figure 11: Installing the On-Wall Mount Unit
3. Optionally, insert the supplied right-angle OTG USB port if you need to connect the
KT-107 to an external USB device.
To Next Page
Loading...
