Kramer Electronics Ltd.
KT-107, KT-107RB - Setting up the KT-107, KT-107RB
Setting the Control Button
The KT-107 Control button is located under the Kramer logo and can be enabled via the
Settings application.
Use the Control button as follows:
Press briefly to enter the KT-107 sleep mode. When in sleep mode, press briefly to exit.
Press twice to activate the camera (if enabled via the Display Menu, see Modifying the
Display Settings on page 24)
Press for 1 to 2 seconds for the pop-up menu to appear and select Power off, Reboot or
Home-page.
Figure 24: Using a Hidden Control Button
When the Touch Panel is off, turn it on again via the power button on the rear side of the
Touch Panel.
To Next Page
Loading...
