Kramer VIA Campus

VIA Campus - Setting Up VIA Campus
7
4 Setting Up VIA Campus
Always switch off the power to each device before connecting it to your
VIA
Campus. After connecting VIA Campus
, connect its power and
then switch on the power to each device.
To connect the VIA Campus as illustrated in the example in Figure 2 you need:
· A VIA Campus Wireless Collaboration Hub
· A display (projector, monitor, or screen).
NOTE: A touchscreen display is best for annotation
· A Local Area Network (LAN) cable for connection to your network. For
wireless network connectivity, use a commercial wireless router
The following client devices can be used with Kramer's VIA collaboration hub:
· A Windows 7/8/10
®
(32-bit/64-bit) computer
· A Macintosh
®
computer, using OSX 10.7.x or newer
· An iPad/iPhone
®
tablet/smartphone with the VIA app installed (iPad 2 or later,
iOS 6.0 or later).
NOTE: When using the Airplay service, no application is needed (refer to iOS mirroring
section)
· An Android
®
OS 4.x tablet/smartphone with the VIA app installed
These optional add-ons can enhance your VIA Campus system:
· A USB camera for distant participants connecting through Lync
®
, Skype
®
,
GoToMeeting
®
, or WebEx
®
· A conferencing speakerphone for remote communication as well as audio
playback of content being shared on the display