6.16.11 Mirroring Settings
By default, the iOS mirroring is enabled and the settings are shown as in the
following example:
The VIA AirPlay device is named VIA_AirMirror_XXXX, where XXXX is a random
combination of letters and numbers This is the name that appears when you look
for AirPlay devices on your iOS device and it can be changed.
Additionally, it defaults to allow four iOS devices to simultaneously mirror on the
VIA Campus. This setting can also be changed. Once these setting changes have
been made, click Apply. Reboot the VIA Campus for the settings to take effect.
6.17 Managing Settings from the VIA Web Management
Interface
To manage settings using the Web browser:
1. Open the Web browser and enter the IP address for your VIA Campus unit
2. Enter user name “su” and password “supass”.
3. Click on VIA Management tab to access the Settings menu.
To Next Page
Loading...
