To open the settings page use keyboard and mouse connected to VIA Campus
unit:
1. Click on Features to expand.
2. Click on Settings.
3. It requests the password for the VIA Super User.
4. Enter the password “supass”. The user name is “su” by default.
The Settings screen opens:
Figure 14: Settings Screen
5. After settings are defined, click on the Reboot tab to apply all.
6.16.1 LAN Settings
Use LAN settings to change the IP address, DNS and default gateway of VIA
Campus. Your VIA Campus unit is set to DHCP LAN settings by default.
When changing these settings, make sure they are correct. Incorrect values
can cause a loss of communication.
To change the default settings:
1. Click on LAN Settings.
2. Select “Static” into the IP Configuration window.
To Next Page
Loading...
