Kramer VIA Campus

52
VIA Campus - Using VIA Campus
To create users:
1. Open the VIA Campus Web site by entering the VIA Campus IP address in
any Web browser (or open a browser from any client PC connected to same
network and enter VIA Campus IP address).
2. At the top, login with default moderator username (supass). The moderator
can create a database of participants by assigning a Username, Password
and Role (Moderator or Participant) to each one of them, as shown in
Figure 23 below:
Figure 23: Moderator Mode
Now any user who was created by the moderator can get permission to join the
session.
It is also possible to select one or more users to be “Web Administrator”, with the
ability to change the settings from the Web administration interface.
To login into the VIA Campus client when Presentation Mode is activated:
1. Open the VIA Campus client and enter the location (IP address of the VIA
Campus gateway).
2. Enter user name and password (as defined by moderator)
The Room Code field displays.
3. Enter the room code (if Room Code is activated).