1. Click Activate Presentation Mode.
2. Click Active Directory under Authentication Mode.
3. Under Active Directory Settings, type in the Active Directory name in
Active Directory Domain text box.
4. Select the Group Based or OU Based radio button as per your Active
Directory configuration.
5. Based on the above selection, type the name of Moderator and Participant
Group/OU in their respective boxes.
Note: VIA Campus does not discover and connect to the Active Directory;
rather it relies on you to correctly enter the details. If there is a typographical
error in any of fields, the users (Moderators and Participants) cannot log in.
6. Click Apply and Reboot to apply the changes and restart the unit.
For further details, refer to Kramer’s white paper “VIA Integration into DNS and
Microsoft Active Directory”.
6.16.10 Basic Moderator Mode
Basic is the simplest moderator mode. By selecting the “Basic” check box and
rebooting the system, the VIA unit now selects the first user logged in as the
moderator.
At any time, the moderator can leave his role and anyone else can take it.
To Next Page
Loading...
