· Facility to Activate/Deactivate Chat by Moderator – This option is offered
to the Moderator of a session, to restrain users from chatting
Display Layout Settings:
· Select the layout between Thumbnail view and dynamic view
· Activate / Deactivate Auto-Hide Thumbnails (fade out of the side thumbnails
after few seconds)
Room Code, Room Name Settings:
· Show Room Name on Wallpaper: This feature displays the Room Name (a
standard IP address) on the VIA Campus home screen. By default, it
displays the current IP address, but you can change it to a Domain Name
System (DNS) name if local DNS services are supported by the network. To
change the Room Name, enter the new address or DNS name, then click on
Apply and reboot VIA Campus. To login any device to the VIA Campus
client, you must enter the same Room Name in the location field on your
device
· Activate Room Code: The Room Code is a security overlay feature that
generates and updates a four digit code. It appears on the lower right of the
VIA Campus home page. When activated, this code must be entered by any
device before logging into VIA Campus
· Always show on Wallpaper: If the room code is activated, it always shows
on the wallpaper below the room name, otherwise the room code only shows
when logging into any client. Set here also the refresh time of the Room Code
(30 minutes as default).
· Show Date Time on Wallpaper: Displays the date/time on the top right of the
display
· Show Room Name / Code on second Display also: Supported only if there
is a second display connected to the VIA Campus unit. This feature allows
you to show the Room Name on the wallpaper of the second display
connected
The color of the text of the room name, the room code, the date and time to show
on the background of the VIA Campus wallpaper can also be changed in this
Settings menu. Click on the square to select your preferred color.
To Next Page
Loading...
