Kramer VP-311DVI

Connecting the VP-311DVI Automatic DVI / Audio Switcher
KRAMER: SIMPLE CREATIVE TECHNOLOGY
14
5.5.1 Setting a Virtual Port
If the control application cannot work with an Ethernet driver, use the Kramer
Virtual port driver as follows:
1. Run the Virtual Serial Port Manager Application.
The Virtual Serial Port Manager window appears (see Figure 10).
Figure 10: The Virtual Serial Port Manager Window
2. Press the Add VSP button to add a serial port and type the IP settings
according to the IP address and local port of your VP-311DVI (see Figure 11).
Figure 11: The Virtual Serial Port Properties Window
3. You can set a virtual port for each local port on your VP-311DVI (see Figure
12).