18
exception of repeating the above combination to un-lock the unit and for storing the
current locked buttons setting (thus letting you make sure the unit always starts up
with the buttons locked). The IR remote’s LOCK and STORE buttons will always be
active, giving another way to turn button/IR remote locking off.
The STANDBY/ON button will flash when the unit’s buttons are locked.
5.4.3 Forcing NTSC output resolution
Press and hold the AUTOTRAK and FREEZE buttons together, then release.
5.4.4 Forcing PAL output resolution
Press and hold the AUTOTRAK and ZOOM buttons together, then release.
To Next Page
Loading...
