19
6 INPUTS AND OUTPUTS
The units have different video inputs and outputs depending on your model.
6.1 VP-701XL & VP-703XL rear panel
(Not shown is the VP-701XL’s 12v DC input, nor the VP-703XL’s AC mains input.)
6.2 VP-704XL rear panel
(Not shown is the VP-704XL’s AC mains input.)
6.3 Computer inputs/outputs
The PC/HD input can accept:
Analog RGBHV
RGsB (sync on green)
RGBS (composite sync at TTL levels)
YUV/YPbPr (including tri-level)
In most cases, the particular input being used will be auto-detected. See ‘Adjust
sources’ for more information on manually selecting an input type.
The VP-704XL unit also has a second 5 x BNC input as shown.
The PD/HD (LOOP) connection is directly connected to the PC/HD input internally
so that a PC monitor may still be attached. No scaling or image alteration is
performed on the PC/HD (LOOP) output.
6.4 Video inputs (VP-704XL only)
CV and YC inputs can accept either standard NTSC or PAL inputs – for example,
from a video camera, VCR, DVD player, gaming device, etc. PAL and NTSC
detection is automatic.
To Next Page
Loading...
